SILICONE COATED MYLAR®
MYLAR® is the registered trademark of DuPont Teijin Films™.MYLAR® is the registered trademark of DuPont Teijin Films™.
About Silicone Coated MYLAR®
The information presented below is believed accurate and is not intended to constitute a specification. The values given reflect average material characteristics and may vary slightly between base suppliers. Users should evaluate the material to determine the suitability for their own particular application.
Specifications
Product Code
Base Film
First Run
Backside Coating
Default Coating Side
G10JRM (previously known as S1P-75 or C1S-OUT)
Polyethylene Terephthalate
Yes
None
Outside
Property
Caliper (mils)
Yield (in.2 / lb.)
Release (grams) *
Typical Value
3
6724
13 **
Control Limit
+/- 0.00025
+/- 832
+/- 5
*Typical values are measures in grams per 1″ at peel speed of 90″/minute, 180 degrees, 1″ strips, fresh, indicated ranges based on three different adhesives
**Release levels measured using 3M 610 Tape Test.
