|
|
|
|
|
|
|
|
|
|
|
R.E.Mistler, "Process Description for Covering Metal with a Laminated Ceramic Coating,"Materials in Design
Engineering," 52 (6) 1960.
R.E.Mistler, G.L.Ploetz, J.A.Smith, "Thermal Expansion of Polycrystalline Lanthanum and Neodymium
Sesquioxides,"J. Am. Ceram.Soc.,46(11)561-2 (1963).
R.E.Mistler, A.T.Muccigrosso, F.Wiesinger, "Crush Strength Determination of Rounded Ceramic
Particles,"Cer.Age, 80(2)36-41 (1964).
R.E.Mistler and R.L.Coble, "Microstructural Variation Due to Fabrication," J.Am.Ceram.Soc.,
51(4)237 (1968).
R.E.Mistler and R.L.Coble, "Comments on the Use of Log-Log Plots in Analyzing Grain Growth
Data,"J.Am.Ceram.Soc., 51(8)472 (1968).
R.F.Gruszka, R.E.Mistler and R.B.Runk, "Effect of Various Surface Treatments on the Bend Strength of High
Alumina Substrates,"B.Am.Ceram.Soc., 49(6) 575-9 (1970).
R.E.Mistler and R.L.Coble, "Rate Determining Species in Diffusion Controlled Processes in Al2O3,"
J.Am.Ceram.Soc., 54(1) 60-1 (1971).
D.J.Shanefield and R.E.Mistler, "The Manufacture of Fine-Grained Alumina Substrates for Thin Films,"The
Western Electric Engineer, 15(2) 26-31 (1971).
N.E.Leaver and R.E.Mistler, "A Gas Fired Roller Hearth Kiln for Fast Firing High Alumina
Substrates,"B.Am.Ceram.Soc., 51(11) 845-6 (1972).
R.E.Mistler, "Grain Boundary Diffusion and Boundary Migration Kinetics in Aluminum Oxide, Sodium Chloride
and Silver,"Sc.D. Thesis, Massachusetts Institute of Technology, June, 1967.
R.E.Mistler, "Possible Trends in Electronic Ceramics,"Ceramic Ind., 100(6) 28-30 (1973).
R.E.Mistler, "High Strength Alumina Substrates Produced by a Multiple Layer Casting
Technique,"B.Am.Ceram.Soc., 52(11) 850-4 (1973).
R.E.Mistler and R.L.Coble, "Grain Boundary Diffusion and Boundary Widths in Metals and
Ceramics,"J.Appl.Phys., 45(4) 1507-9 (1974).
D.J.Shanefield and R.E.Mistler, "Fine Grained Alumina Substrates: I, The Manufacturing
Process,"B.Am.Ceram.Soc., 53(5) 416-20 (1974).
R.E.Mistler, P.T.Morzenti and D.J.Shanefield, "Fine Grained Alumina Substrates: II,
Properties,"B.Am.Ceram.Soc., 53(8) 564-8 (1974).
D.J.Shanefield and R.E.Mistler, "Filter for Ceramic Slips," B.Am.Ceram.Soc., 55(2) 213 (1976).
R.E.Mistler, D.J.Shanefield and R.B.Runk, "Tape Casting of Ceramics," in Ceramic Processing Before Firing,
G.Y.Onoda,Jr. and L.L.Hench, eds., John Wiley and Sons, New York, 1978 pp 411-448.
R.E.Mistler and D.J.Shanefield,"Washing Ceramic Powders to Remove Sodium Salts," J.Am.Ceram.Soc., 57(7)
689 (1978).
H.W.Stetson, R.E.Mistler and W.J.Gyurk, "A Theoretical Discussion of Surface Finish of Ceramic Substrates,"
The International Journal for Hybrid Microelectronics, 6(1) 621 (1983).
R.E.Mistler, "Tape Casting: The Basic Process for Meeting the Needs of the Electronics
Industry,"B.Am.Ceram.Soc., 69(6) 1022-26 (1990).
R.E.Mistler, "Tape Casting," in Engineered Materials Handbook, Volume 4, Ceramics and Glasses, ASM
International, 1991 pp 161-5.
R.E.Mistler, "Tape Casting Technology,"in Ceramic Technology International 1995, Ian Birkby, ed., 1995,
pp 171-6.
R.E. Mistler, "The Principles of Tape Casting and Tape Casting Applications,"in Ceramic Processing,R.A.
Terpstra, P.P.A.C. Pex,and A.H. DeVries,eds.,Chapman& Hall,London, 1995, pp. 147-173.
R.E. Mistler and S.L. Masia, "Coated Paper for Use as a Casting Surface in Tape Processing," in Ceramic
Manufacturing Practices and Technologies, B. Hiremath, T. Gupta, and K.M. Nair, eds., Ceramic
Transactions, Vol. 70, The American Ceramic Soc., 1996, pp. 157 - 166.
E.M Anderson, R.A. Marra, and R.E. Mistler, "Tape Casting Reactive Aluminas," B. Am. Ceram. Soc., 76 (7)
45-50 (1997).
R.E. Mistler, "Tape Casting: Past,Present, Potential," B. Am. Ceram. Soc., 77(10) 82-6 (1998).
R.E. Mistler, V.K. Sikka, C.R. Scorey, J.E. McKernan, and M.R. Hajaligol, "Tape Casting as a Fabrication
Process for Iron Aluminide (FeAl) Thin Sheets," in Materials Science and Engineering, Vol. A258, Iron
Aluminides,: Alloy Design, Processing, Properties, and Applications, S.C. Deevi, D.G. Morris, J.H.
Schneibel, and V.K. Sikka, eds. Elsevier, New York, 1998, pp. 258-65.
R.E. Mistler, "Tape Casting: A Historical Review, Current Status and Potential for the Future," in Multilayer
Electronic Ceramic Devices, J. Jean, T.K. Gupta, K.M. Nair, and K. Niwa, eds. Ceramic
Transactions, Vol. 97, The American Ceramic Society, 1999, pp. 87-101.
E.R. Twiname and R.E. Mistler, "Tape Casting," in Ceramic Innovations in the 20th Century, J.B. Wachtman,
Jr., ed., The American Ceramic Society, 1999, pp.54-5.
R.E. Mistler and E.R. Twiname, Tape Casting: Theory and Practice, The American Ceramic Society,
Westerville, OH, 2000.
R.E. Mistler and E.R. Twiname, "Two Stage Preparation of Tape Casting Slips," in Electronic Ceramic
Materials and Devices, K.M. Nair and A.S. Bhalla, eds., Ceramic Transactions, Vol. 106, The
American Ceramic Society, 2000, pp. 415-23.
R.E. Mistler, "Tape Casting: An Enabling Fabrication Technology," Ceramic Ind., 150(7) 27-30 (2000)
E.R. Twiname, G.L. Messing, and C.R. Randall, "Embedding a Passive Material Layer in Low Temperature
Co-Fired Packaging," Int. Journal of Microcircuits & Electronic Packaging, 24(2) 105-121 (2001).
E.R. Twiname, R.E. Mistler, "Tape Casting," in The Encyclopedia of Materials: Science and Technology,
K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan eds., Elsevier Ltd.,
Oxford, 2001, Chapter 12.
E.R. Twiname, G.L. Messing, C.A. Randall, "Embedding a Passive Material Layer in Low-Temperature Cofired
Packaging," in Recent Developments in Electronic Materials and Devices, K.M. Nair, A.S. Bhalla,
S.I. Hirano eds., Ceramic Transactions, Vol. 131, The American Ceramic Society, 2002, p. 269-87.
S-H Lee, G.L. Messing, E.R. Twiname, A. Mohanram, C.A. Randall, D.J. Green, "Co-sintering of Multilayer
Ceramics," Euro Ceramics VII Pt. 1, Trans Tech Publications, Switzerland, p.257-60, Key Engineering
Materials Vol. 206-13, European Ceramic Society, 2002.
M.G. Gifford, E.R. Twiname, and R.E. Mistler, "Analysis of Thickness Control Variables in Tape Casting,
Part II: The Effect of Blade Gap," in Colloidal Ceramic Processing of
Nano-, Micro-, and
Macro-Particulate Systems, W.H. Shih, et al., eds., Ceramic Transactions, Vol.
152, The
American Ceramic Society, 2004, pp. 139 - 146.
U.S. 3,652,378 "Strengthening Alumina Substrates By Incorporating Grain Growth Inhibitor in Surface and
Promoter in Interior," March 28, 1972.
R.E.Mistler, "Tape Casting: An Enabling Ceramic Fabrication Technology,"
Seminar presented at Tianjin University, Tianjin, P.R. China, May 10, 2005.
R.E.Mistler, "Tape Casting: An Enabling Ceramic Fabrication Technology,"
Seminar presented at Huazhong University of Science and Technology, Wuhan, P.R. China,
May 12, 2005.
R.E.Mistler, "Solid Freeform Fabrication,"
Seminar presented at Huazhong University of Science and Technology, Wuhan, P.R.China,
May 12, 2005.
R.E.Mistler, "Tape Casting: An Enabling Ceramic Fabrication Technology,"
Seminar presented at Xi'an Jiaotong University, Xi'an, P.R. China, May 16, 2005.
R.E.Mistler, "Tape Casting: An Enabling Ceramic Fabrication Technology,"
Invited Seminar at Zhengzhou University, Zhengzhou, PRC, September 28, 2004.
R.E.Mistler, A.T.Muccigrosso and G.L.Ploetz,"Correlations Between Sieve Analyses, Surface Areas and Shape
Factors of Ceramic Particles," 63rd Annual Meeting of the American Ceramic Society,
Toronto, Canada, Paper 5-M-61,April,1961.
R.E.Mistler, A.T.Muccigrosso and F.W.Wiesinger, "Crushing Strength of Rounded Ceramic Particles," 64th
Annual Meeting of the American Ceramic Society, New York, Paper 18-5S-62,May,1962.
R.E.Mistler,G.L.Ploetz and J.A.Smith, "Thermal Expansion of Polycrystalline Lanthanum Sesqioxide and
Neodymium Sesquioxide," 65th Annual Meeting of the American Ceramic Society, Pittsburgh,
Paper 47-B-63,May 1963.
R.E.Mistler and R.L.Coble, "Secondary Grain Growth in Aluminum Oxide," 70th Annual Meeting of the
American Ceramic Society, Chicago, Paper 33-B-68, April,1968.
R.M.Spriggs,H.W.Stetson,R.E.Mistler and P.A.Dalton, "Intermediate Stage Sintering Kinetics of a Non-Ideal
Aluminum Oxide Powder," Fall Meeting of the Basic Science Div., American Ceramic Society,
St.Paul, Paper 6-BE-68F,September,1968.
R.E.Mistler and R.L.Coble, "Grain Boundaries and Boundary Diffusion in Aluminum Oxide,"Fall Meeting of the
Basic Science Div., American Ceramic Society, Ottawa, Canada, Paper 5-B-69-F, September,1969.
R.E.Mistler, "High Strength Alumina Substrates Produced by a Multiple Layer Casting Technique,"23rd Pacific
Coast Regional Meeting, American Ceramic Society, San Francisco, Paper 25-E-70F,October,1970.
R.E.Mistler, "The Evolution of a Ceramic Substrate, "Seminar at Massachusetts Institute of Technology,
April,1971.
R.E.Mistler,D.J.Shanefield and R.B.Runk,"The Tape Casting of Ceramics, "Tenth University Conference on
Ceramics Science, University of Florida, Gainesville,Florida,January 29,1975
G.L.Ploetz, A.T.Muccigrosso and R.E.Mistler, "Ceramic Materials for Nuclear Power Applications," AIME
Meeting, St. Louis, February,1961.
A.T.Muccigrosso,J.R.Fascia,G.L.Ploetz and R.E.Mistler, "Mercury Pycnometer for Particle Densities,"63rd
Annual Meeting of the American Ceramic Society,Toronto,Canada,Paper 6-M-61,April,1961.
G.L.Ploetz,R.E.Mistler and A.T.Muccigrosso, "A Note on the Theoretical X-Ray Density of 93% Enriched
UO2"Meeting on the Characterization of Uranium Dioxide,Oak Ridge, December,1961.
H.W.Stetson and R.E.Mistler, "Microstructure of Two Microinch 'Center Line Average' As-Fired Alumina
Substrates,"21st Pacific Coast Regional Meeting, American Ceramic Society, Pasadena,
October,1968.
R.F.Gruszka,R.E.Mistler and R.B.Runk,"Strengthening of High Alumina Substrates,"72nd Annual Meeting of the
American Ceramic Society,Philadelphia, Paper 9-E-70,May,1970.
D.J.Shanefield and R.E.Mistler, "Fine-Grained Alumina Substrates for Thin Film Microcircuits," 139th National
Meeting of the Electrochemical Society,Washington, Paper No.3,May,1971.
N.E.Leaver and R.E.Mistler, "A Gas-Fired Roller Hearth Kiln for Fast Firing High Alumina Substrates,"Fall
Meeting of the Materials and Equipment Div., American Ceramic Society, Bedford, Pa., Paper 9-MW-
71F,October,1971.
D.J.Shanefield and R.E.Mistler,"Manufacturing Process for Fine Grain Alumina Substrates,"75th Annual Meeting
of the American Ceramic Society,Cincinnati, Paper 37-E-73,May,1973.
R.E.Mistler and D.J.Shanefield, "Coprecipitated Manganese-Zinc Ferrite Powders,"80th Annual Meeting of the
American Ceramic Society, Detroit,May,1978.
D.J.Shanefield and R.E.Mistler, "Washing Ceramic Powders to remove Sodium Salts,"80th Annual Meeting of
the American Ceramic Society, Detroit,May,1978.
R.E.Mistler and D.J.Shanefield,"The Characterization of Unfired Tape Cast Ceramics,"1979 Electronics Division
Fall Meeting, American Ceramic Society, Williamsburg,Virginia, September,1979.
R.E.Mistler,"Tape Casting Ceramics, "Society of Manufacturing Engineers Clinic, Manufacturing with Ceramic
Powder, Philadelphia,February,1980.
R.E.Mistler, "Deflocculants for the Production of Alumina Thick and Thin Film Substrates," 7th Annual Northern
Ohio Section Symposium - Alumina, Cleveland,Ohio, March 14,1980.
C.R.Steuernagel and R.E.Mistler, "Microcrystalline Cellulose Binders and Lubricants for the Extrusion of High
Alumina Ceramics,"82nd Annual Meeting of the American Ceramic Society, Chicago, April,1980.
R.E.Mistler, "Packaging for Semiconductors,"Graduate Seminar at Massachusetts Institute of Technology,
Cambridge, May 8, 1980.
R.E.Mistler, "Electronic Ceramics, "Seminar at The Center for Professional Advancement, East Brunswick, New
Jersey, December 4, 1980.
R.E.Mistler and M.Rupell, "Thermal Dissipation and Dielectric Breakdown Strength as a Function of Base
Substrate Material and Enamel Thickness of Porcelain Enamel Substrates,"83rd Annual Meeting of the
American Ceramic Society, Washington, May 5, 1981.
R.E.Mistler and L.D.Jones, "Microcrystalline Cellulose Additives in Ceramic Glazes for Electrical
Insulators,"83rd Annual Meeting of the American Ceramic Society, Washington, May 5, 1981.
R.E.Mistler, "Porcelain Enameled Substrates for Electronic Applications,"Summer Meeting of the Ceramic
Association of New Jersey, Harmony, New Jersey, June 26,1981.
R.E.Mistler and G.A.Hauser, "Porcelain Enameled Substrates: Dielectric Strength and Design Criteria,"
Electronics Division of the American Ceramic Society Fall Meeting, Cambridge, Massachusetts,
September 13, 1982.
R.E.Mistler, "Packaging For Semiconductors,"Graduate Seminar at Rutgers University, New Brunswick, New
Jersey, February 9, 1983.
H.W.Stetson,R.E.Mistler and W.J.Gyurk, "A Theoretical Discussion of Surface Finish of Ceramic Substrates,"
Annual Meeting International Society for Hybrid Microelectronics, Philadelphia, November 1, 1983.
R.E.Mistler, "Metallization of Tape Cast Ceramics,"Engineering Foundation Conference of Applications of
Ceramics for Microelectronic Interconnections, Santa Barbara, California, March 18, 1986.
R.E.Mistler, "Tape Casting-Basic Process for Two - One Billion Dollar Businesses," Philadelphia Section of The
American Ceramic Society, Fort Washington, Pennsylvania, November 17, 1986.
R.E.Mistler, "Metallization of Tape Cast Ceramics,"Trenton Section of The American Ceramic Society,
Princeton, New Jersey, March 26, 1987.
R.E.Mistler, "Tape Casting-Basic Process for Two - One Billion Dollar Businesses," Baltimore-Washington
Section of The American Ceramic Society, Bethesda, Maryland, September 27, 1988.
R.E.Mistler,D.P.Bhasin and T.E.Boland, "QPAC 40 as a Tape Casting Binder,"41st Pacific Coast Regional
Meeting of The American Ceramic Society, San Francisco, California, October 24, 1988.
R.E.Mistler,"Tape Casting-Basic Process for Two - One Billion Dollar Businesses," Northern Ohio Section 16th
Annual Symposium, American Ceramic Society, Warrensville, Ohio, March 31, 1989.
R.E.Mistler, "Tape Casting as a Ceramic Fabrication Process," Symposium on Tape Casting of Advanced
Ceramics, Senter For Industriforskning, Oslo, Norway, April 15, 1991.
R.E.Mistler, "The Principles of Tape Casting and Tape Casting Applications," NKV - Summerschool,
Netherlands Ceramic Society, Petten, the Netherlands, September 9, 1991.
E.R.Twiname and R.E. Mistler, "Comparison of Aqueous and Non-Aqueous Tape Cast Nickel Electrodes for
Use in Molten Carbonate Fuel Cells," 96th Annual Meeting of The American Ceramic Society,
Indianapolis, IN, April 25, 1994.
E.M. Anderson and R.E. Mistler, "Tape Casting Reactive Aluminas,"96th Annual Meeting of The American
Ceramic Society, Indianapolis, IN, April 25, 1994.
R.E. Mistler and S.L. Masia, "Coated Paper For Use As A Casting Surface in Tape Processing,"International
Symposium on Manufacturing Practices and Technologies, The American Ceramic Society, New
Orleans, LA, November 7, 1995.
E.R. Twiname, X. Tang, and S.A. Ibbitson, "Water Based Tape Casting: Scale Up To Manufacturing,"1996
Annual Meeting of the American Ceramic Society, Indianapolis, IN, April 16, 1996.
E.R. Twiname, R.E. Mistler, "Aqueous Tapecasting as a Viable Alternative to Organic Solvents,"52nd Annual
Ceramic Forum - Technologies for Meeting Regulatory Requirements, The Pennsylvania Ceramics
Association, September 12, 1997
E.R. Twiname, R.E. Mistler,"Green Ceramic Tape as a Raw Material",International Symposium on
Microelectronics, ISHM/IMAPS/ACERS Electronics Division 1997 Fall Meeting, Philadelphia, PA,
October 15, 1997.
E.R. Twiname, "Aqueous Tape Casting as an Alternative to Organic Processing," Philadelphia Section of The
American Ceramic Society, Exton, Philadelphia, PA, October 20, 1997.
R.E. Mistler, V.A. Sikka, C.R. Scorey, M.R. Hajaligol, "Tape Casting as a Fabrication Process for Iron
Aluminide Strip," International Symposium on Iron Aluminides, San Antonio, TX February 18, 1998.
R.E. Mistler, "Tape Casting: A Historical Review, Current Status and Potential for the Future," 1998 Annual
Meeting of the American Ceramic Society, Cincinnati, OH May 3-6, 1998.
E.R.Twiname, R.E. Mistler, "Tape Casting: A Historical Review, Current Status and Potential for the Future,"
ISHM/IMAPS Keystone Section Spring Meeting, Allentown, PA May 13, 1998.
R.E. Mistler, E.R. Twiname, "Two Stage Preparation of Tape Casting Slips," 1999 Aunnual Meeting of the
American Ceramic Society, Indianapolis, IN, April 28, 1999.
E.R. Twiname, R.E. Mistler, "Physics of Fluid Flow Under a Doctor Blade,"1999 Annual Meeting of the
American Ceramic Society, Indianapolis, IN April 28, 1999.
R.E. Mistler, "Tape Forming," Invited Seminar at the Metallurgy and Materials Science Research Institute at
Chulalongkorn University, Bangkok, Thailand, March 1, 2001
R.B. Cooley, E.R. Twiname, R.E. Mistler, “Analysis of Thickness Control Variables in Tape Casting,” 2002
Annual Meeting of the American Ceramic Society, St. Louis, MO, April 30, 2002.
R.E. Mistler, “Tape Casting: An Enabling Ceramic Fabrication Technology,” Materials
Science and Technology
in Engineering Conference, Hong Kong,
PRC, January 17, 2003.
M.G. Gifford, E.R. Twiname, R.E.
Mistler, “Analysis of Thickness Control Variables in Tape Casting, Part II:
The Effect of Blade Gap,” 2003 Annual Meeting of the American Ceramic Society, Nashville, TN,
April 29, 2003.
R.E. Mistler, E.R. Twiname, “Low Temperature Co-Fired Ceramics for Electronics,”
2003 Meeting of the
Chinese Ceramic Society, Taipei, Taiwan, November 14, 2003.
Introduction Page