|
|
|
|
|
|
|
|
|
|
|
"Silicone coated MylarTM"
PRODUCT DESCRIPTION
Date: April 2, 2001
Product Code: G10JRM (previously known as S1P-75 or C1S-OUT)
Base Film: Polyethylene Terephthalate
First Run: YES
Backside Coating: NONE
Default Coating Side: OUTSIDE
| Property | Typical Value | Control Limit |
| Caliper (mils) | 3 | +/- 0.00025 |
| Yield (in.2 / lb.) | 6724 | +/- 832 |
| Release (grams) | 13 | +/- 5 |
* Typical values are measured in grams per 1" at a peel speed of 90"/minute, 180 degrees, 1" strips, fresh, indicated ranges based on three different adhesives.
** Release levels measured using 3M 610 tape test.
The information presented above is believed accurate and is not intended to constitute a specification. The values given reflect average material characteristics and may vary slightly between base suppliers. Users should evaluate the material to determine the suitability for their own particular application.
Linecard of Products
Back to Home Page